Cable pulling capston winch has a rope drum which can accommodate the required diameter of the wire rope on it and this rope is taken out through a double capston unit and is guided out to the target through pulleys. This unit is powered by a diesel engine which drives a closed loop hydraulic pump, which in turn develops oil pressure and supplies this oil to the hydro motor which drives the double capstan via., Gear box thereby pulling the wire rope.
Cable Pulling capston winch – Hydraulically operated to be primarily used for underground cable pulling, the unit has a pulling capacity of 150KN and is designed to a pull length of 1250mts. it is powered by a turbo charged diesel engine.
| specification | Value |
|---|---|
|
Dimensions of the Unit |
4125 mm(L)X1900 mm(W) X 1800mm(H) |
|
Power Source |
Four cylinder turbo charged diesel engine |
|
Power of the Diesel Engine |
36KW/47 hp at 1500 RPM |
|
Make of the Diesel Engine |
Yanmar/Mitsubishi |
|
Engine Cooling |
Water Cooled |
|
Rated Fuel Consumption |
4.8 litre per hour at 1500rpm |
|
Min Fuel Consumption |
3.85 litre per hour at 1500rpm |
|
Electrical Control Voltage |
12V |
|
Method of Hydraulic oil cooling |
Oil cooler with thermostat fan |
|
No of wheels provided |
4 no.s |
|
Canopy for the total unit |
Provided |
|
Rope Guide Unit for Drum |
Angle Fleet Compensator |
|
Max. working hydraulic pressure |
250 Bar |
|
Hydraulic Pump |
Closed Loop unit with Manual Servo Control |
|
Capstan Diameter |
250 mm |
|
Type of Capstan |
Double |